Technical Papers Published in Eurogrease

The Technical Papers are available to registered ELGI members.
Do contact the ELGI for information.

Eurogrease Published Paper Overview

Date Publication
Author(s)
Title
2013 02 April/MayJune E.M. Stempfel Biodegradable Lubricating Greases  20 Years Ago vs. Today
2013 02 April/MayJune C. Coe 2011 NLGI Grease Prouction Survey
2013 02 April/MayJune D.A. Piermann Main Bearing Lubrication for Wind Turbines A Systematic Approach for Grease Selection
2013 01 January/February/March P. Robinson Understanding the additive requirements for formulating a high performance ecolabel grease
2013 01 January/February/March P. Bessette Testing greases to determine their suitability for the long term lubrication of electrical grid circuit breakers
2012 04 October/November/December M. Fathi-Najafi; D. Hedlund, P. Nyman, T. Norrby Low temperature tribology A study of the influence of base oil characteristics on friction behaviour under low temperature conditions
2012 04 October/November/December E. Kuhn Friction and wear process within grease film
2012 04 October/November/December D. Hesse Specialty lubricants tailored for current and future brake system components
2012 03 July/August/September J-P. Stemplinger Wear behaviour of grease lubricated gears
2012 03 July/August/September M. Sommer Influence of grease components on the tribological behaviour of rubber seals
2012 03 July/August/September A. Orendorz Surface analysis – A powerful tool in the development and testing of new lubricants
2012 02 April/May/June J. Spagnoli False Brinelling Test (Riffel) for Wind Turbine Grease
2012 02 April/May/June P. Whitehead The financial implications of data generation for chemical registration under REACH
2012 02 April/May/June K.-J. Minis Future of the grease market in Germany
2012 01 January/February/March F. Herrero, G. Fish, W.C. Ward Extreme Pressure Performance of Greases
2012 01 January/February/March J. P. Kaperick, J. Guevremont, K. Hux A Study of Friction Modifiers in Grease
2011 04 October/November/December P. M. Lugt, A. van den Kommer, H. Lindgren, C. Roth The ROF+ methodology for grease life testing
2011 04 October/November/December S. Rovinetti, M. Avataneo, M. Beltramin, G. Boccaletti, V. Carsetti, G. Marchionni, F. Riganti, A. Russo The new frontier of fluorinated lubricants
2011 03 July/August/September M. Jungk Comparison testing of solid lubricants as dispersion, grease, paste and powder
2011 03 July/August/September A. Medzhibovskiy Specifics of energetic effect of anti-wear additives (friction modifiers) in lubricants
2011 03 July/August/September L. Honary A status update on manufacturing biobased grease with microwaves
2011 02 April/May/June D. Devore; S. Wang A Study of polymer additives in mineral oil and vegetable oil-based
2011 02 April/May/June P. Bessette The advantages and disadvantages of attenuated total reflectance, ATR, infrared spectroscopy
2011 02 April/May/June S. Hausmann Grease Thickeners - REACh registration progress (ERGTECF)
2011 02 April/May/June P. Boogaard Toxicity of lithium salts - how bad are they? (ERGTCEF)
2011 02 April/May/June E. Rushton Classification and labelling of products (CLP ERGTECF)
2011 01 January/February/March M. Fiedler Complexity of trilbological characterizations illustrated with poly-alpha-olefin grease
2011 01 January/February/March B. Koch, T. Litters, N. Zaki Influence of base oil polarity and thickener type on visco-elastic properties. Investigations with strain sweep rheometry at +25 ˚C amd +80 ˚C
2011 01 January/February/March H. Adolph, T. Litters Determination of the low remperature performance of lubricating greases - correlation of methods
2010 04 October/November/December O.A. Makedons'ky Grease market in Ukraine
2010 04 October/November/December M. Kuhn, P. Staub, M. Schweigkofler, A. Orendorz Tribolayer - lubricant additives protecting against wear
2010 04 October/November/December L. Honary Microwave based grease manufacturing - Now a reality
2010 03 July/August/September E. Kuhn, M. A. Delgado Canto Description of the structural degradation of lubricating greases as a reation of th tribological system
2010 03 July/August/September Y.L. Ishchuk, O.A. Mishchuk, O.O. Makedons'ky, A.V. Shaposhnyk, A.V. Bogaichuk Lubrication properties of high performance greases for various applicaitons: ratings of efficiency
2010 02 April/May/June E. Kuhn Some comments about the tribology of lubricating greases
2010 02 April/May/June P. Logvinenko, B. Volodymir, S. Riabov, P. Bolgarin Technological Lubricant based on rapeseed oil, products and wastes of its reprocessing
2010 01 January/February/March M. Jungk Anti-friction as supplement to grease or oil lubrication
2009 04 October/November/December V. Serra-Holm The changes in the global base oil market and their potential impact on the grease industry
2009 04 October/November/December R. Zhang Development and characterisation of high performance overbased calcium oleate complex grease
2009 04 October/November/December G. Fish Development of greases with extended grease and bearing life
2009 03 July/August/September P.-O. Larsson-Kråik Get your grease prize being grease wise
2009 03 July/August/September L. Honary New developmenbts in biobased and conventional grease manufacturing processes
2009 03 July/August/September C. Coe Shouldn't grease upper operating temperature claims have a technical basis?
2009 02 April/May/June A. Begg; P.M. Lugt; F.C.M. Fiddelaers SKG grease knowledge and sustainability
2009 02 April/May/June E. Nehls; T. Habereder Additive systems for biodegradable greases, according to European Ecolabel
2009 02 April/May/June P. Whitehead REACH update and current acitivities
2009 01 January/February/March R.I. Popovici; D.J. Schipper Modelling contact phenomena and those influenced by greases
2009 01 January/February/March S. Bots; P. Weismann Used grease analysis; smallest sample volume provides detailed information
2009 01 January/February/March E. Gorritxategi; J. Terradillos; A. & E. Aranzabe; A. Arnaiz; Novel method for lube quality status assessment based on visible spectrometric analysis
2008 04 October/November/December G. Fish; W.C. Ward Jr.; F. Qureshi Influence of components blended to a target base oil viscosity on liquid phasse and lithium grease properties
2008 04 October/November/December P.A. Guarda; F. Riganti; G. Marchionni; A. Di Meo Linear PFPE oils with improved thermal stability
2008 04 October/November/December M. Jungk; D. Drees; S. Achanta Grease tackiness/adhesion
2008 03 July/August/September V. Serra-Holm Naphthenic bright stocks: tomorrow's possibility or today's reality?
2008 03 July/August/September M. Grebe Various influencing factors on the development of standstill marks (false brinelling effect)
2008 03 July/August/September C.R. Coe Development and field testing of a heavy duty synthetic polyurea grease
2008 02 April/May/June P. Teixeira Gomes Lubricant & grease market in Portugal
2008 02 April/May/June J.-C. Dufour The European lubricants market
2008 02 April/May/June S. Nolan Evaluation of low temperature properties of lubricating greases for centralised systems
2008 01 January/February/March M. Jungk Silicone oil based greases - a new apporach
2008 01 January/February/March M. Bichler The new "MoreQuiet" grease noise evaluation system: the best of two worlds
2007 04 October/November/December A. Williams Creating a lithium based aircraft wheel bearing grease
2007 04 October/November/December H. Adolph; P. Bartl Compatibility and interchangeability of NATO-Greases
2007 04 October/November/December A. Bessette The amount of PTFE in perfluoropolyether grease by the enthalpy of fusion
2007 03 July/August/September E. Kuhn Influence of the soap content of lubricating greases on the tribological process
2007 03 July/August/September A. Swallow; J. Spenceley Globally harmonised system (GHS) for the classification and labelling of chemicals
2007 03 July/August/September E. Kobylyansky; H. Kravchuk; Y. Ishchuk; O. Oliynykov Overbased phenolate complex greases
2007 02 April/May/June S. Harley REACH: an update on the forthcoming regulation
2007 02 April/May/June G. Gow, M. Fathi-Najafi, M. Kruse REACH-free lubrication with a novel polymer thickened lubricant
2007 02 April/May/June V. Serra-Holm Super heavy naphthenics: additive or base oil?
2007 02 April/May/June L.A.T. Honary Biobased greases and lubricants: technology advances and market opportunities
2007 01 January/February/March W. Ewald, T. Lange, S. Dörr, J. Moilanen Impact of various base oils on the low temperature properties of lithium greases
2007 01 January/February/March A. Williams Aircraft greases - expectations - requirements - areas of effect
2007 01 January/February/March T. Litters, G. Jacobs Modern terephthalamate greases, a renaissance?
2006 04 October/November/December Test Methods Working Group (TMWG), D. Miller Comparison of standards
2006 04 October/November/December V.M.M.B da Mota, L.A.A. Ferreira Experimental investigations on rolling contact fatgue of artificially dented surfaces under grease elastohydrodynamic lubrication
2006 04 October/November/December M. Fathi Najafi, S.Breum Hansen Keeping it simple is probably the best: thread compound development for the on - and offshore industry
2006 04 October/November/December Jisheng E, G. Fish, S. Rosenkranz, F. Reher Comparison between PDSC and oxygen bomb test methods for evaluation of grease oxidation stability
2006 03 July/August/September R. Vanecek Eastern European grease market
2006 03 July/August/September W.J. Bartz Tribological aspects of wind energy plants
2006 03 July/August/September J. Terradillos; M. Bilbao; J.I. Ciria; A. Malaga; J. Ameye Oil analysis as an improvement tool for the behaviour of wind turbine gears: main problems detected through the condition of the lubricant
2006 02 April/May/June S. Harley A guide to REACh for ELGI members
2006 02 April/May/June M. Morris REACh grease consortium
2006 02 April/May/June S. Harley REACh - an update on the forthcoming regulation
2006 02 April/May/June G. Gow Implications of REACh from a grease producer's perspective
2006 02 April/May/June A. Swallow Eco-laber: how do esters match up?
2006 01 January/February/March A. Swallow; J. Eastwood Selection criteria of esters in environmentally acceptable greases
2005 06 November/December J. Deelen Flexible containerised module system for greaase production
2005 06 November/December C.F. Kernizan; S.J. Nolan; P.S. Greenfield; C.L. Hollingshurst Desiccated lithium - a novel saponification agent for lithium soap grease manufacture
2005 06 November/December J.S. Kay, P.E. Morgan; D. Morgan Evaluation of various raw material options for producting aluminium complex greases
2005 05 September/October P.A. Bessette Some insights regarding the filtration of lubricating grease
2005 05 September/October A. Arranzabe et al Comparing different analytical techniques to monitor lubricating grease degradation
2005 05 September/October J. Zuleeg Predition of stick-slip behaviour with the aid of the oscillation friction wear tester SRV
2005 04 July/August E. Kuhn; V. Kapoor; T. Rieling Deformation tests with model greases using a rheometer
2005 04 July/August L. Hughes; A. Swallow A Study of the possible impact of REACH for an automotive grease manufacturer
2005 04 July/August M. Gullaner To Bi or not to Bi…Bismuth in the soap structure
2005 04 July/August B.S. Nagarkoti; S.H. Dalvi; A.K. Jain; B. Rameswar; G. Baskaran Railroad tapered roller bearing grease
2005 03 May/June M. Morris European Communities - Lubricants Rco-Label
2005 03 May/June J. Cliff The UK Grease Market
2005 02 March/April M. E. Hunter; presentated by C. van Booma Synergistic rust inhibitor and EP/AW additives for greases
2005 01 January/February J. Eastwood; A. Swallow Selection of esters in environmentally acceptable greases
2004 06 November/December P.A. Bessette Determining the low temperature properties of grease with a Brookfield Viscometer
2004 06 November/December N. van Leeuw Grease lubricating requirements for centralised lubrication systems in turnkey plants
2004 05 September/October P.C. Hamblin; S. Laemlin; P. Rohrbach; J. Reyes-Gavilan; D. Zschech Evaluation of the thermo-oxidative characteristics of greases by pressurised differential scanning calorimetry
2004 05 September/October T.W. Dicken Update of draft AMS-M-99D general purpose airframe grease
2004 05 September/October E.M. Stempfel; M. Baumann Environmentally acceptable lubricants in railway applications
2004 04 July/August Kobylyansky; Ishchuk; Abramovych; Makedonsky Nano-technologies in lubricatin materials ideas & prospects
2004 04 July/August H. Ridderikhof Safety health & environment considerations in the selection & development of base-fluids for industrial lubricants
2004 04 July/August J.M. Kurosky Advanced grease compositions for marine, inland waterway & water processing applications
2004 03 May/June B. Johnson The use of a stress rheometer in lieu of cone penetration
2004 03 May/June P. Maccone New effective thickener for fluorinated greases
2004 03 May/June J. Baudner; L. Kanne Grease concept for the reduction of relubrication quantities in the stell industry
2004 02 March/April B. Johnson; J. Ameye Condition monitoring of anti-oxidant chemistry of in-service bulk greases
2004 02 March/April W. Mackwood; R. Muir; K. Brown; T. Austin Reduction in power plant maintenance using calcium sulfonate complex grease
2004 01 January/February M. D. Kieke; R.J. Klein Earth friendly vegetable oil based greases thickened with organophilic clay
2004 01 January/February S. Nolan Use of a controlled stress rheometer to evaluate rheological properties of grease
2003 06 November/December V. Serra-Holm Life cycle assessment (LCA) from cradle to gate of mineral and vegetable base oils used in the production of lubricants
2003 06 November/December A. Willing Environmental classification of formulations according to the dangerous preparations directive (99/45/EEC)
2003 05 September/October M. Jungk What have silicones & perfluoropolyethers in common?
2003 05 September/October R. Luther Lubricating greases & the environment: viewpoints on actual European legislation
2003 04 July/August O. Makedonsky Structure and physico-chemical properties of overbased calcium sulfonate complex greases
2003 04 July/August J. Hirigoyen; E. Gard Tribological properties of fullerene type additives, the astralenes, shown in comparison with standard solid lubricants in a lithium grade 2 standard grease
2003 02 March/April A. Aranzabe Garcia The application of micro technologies in condition monitoring of grease in centralised systems
2003 02 March/April O. Rohr Preformed soap as thickener and EP-additive for grease production
2003 01 January/February J. Kurosky; S. Mehdi; V. Zanfir Grease compatibility or performance dilution?
2003 01 January/February W. Mackwood Calcium sulfonate complex grease: the next generation food machinery grease
2002 06 November/December S. Broersen LubeSelect: bearing lubricant selection tool
2002 06 November/December E. Kuhn; T. Schmidt Investigation into the cohesion behaviour of lubricating greases with a new pendulum tribometer
2002 05 September/October L. Muntada The ubricant market in Spain
2002 05 September/October J. S. Kay; R.S. Panesar Optimising the manufacture of lithium grease with the Stratco contactor reactor
2002 04 July/August S. Peters European dangerous preparations directive (DPD) 1999/45/EC and its influence on labelling
2002 04 July/August J. Eastwood EC dangerous preparations directive (DPD) application to greases and ingredients
2002 03 May/June H. Gustafsson Environmental requirements for lubricating grease and hydraulic fluids
2002 03 May/June A. Feβenbecker Environmentally acceptable lubricants: an additive point of view
2002 03 May/June J. Cliff The Austrian grease market
2002 03 May/June K. Yano The NSF International non-food compounds registration and listing programme
2002 03 May/June Rhein Chemie CD test methods for industrial lubricants
2002 03 May/June C. van Booma Ashless rust inhibitors for greases
2002 02 March/April M. Jungk; H. Stoegbauer New developments in automotive ball joint greases
2002 01 January/February P.M. Cann Friction behaviour of grease in rolling-sliding EHL contacts
2001 06 November/December A. van den Kommer; J. Ameye Prediction of remaining grease life: a new approach and method by linear sweep voltammetry
2001 06 November/December T. Litters; W. Dresel; C. Nemack Some findings with the Vogel FTG 2 tester according to Marawe: a new test method for measuring the tendency of lubricating greases to separate oil and to harden under pressure
2001 05 September/October W. Möller Grease pack recommendations
2001 05 September/October H. Reust The Swiss chemical legislation: present and future
2001 05 September/October A. Mistry; R. Bradbury Performance of lubricating grease in the presence of water
2001 04 July/August F. Meier Swiss grease market
2001 04 July/August E. Kuhn A stress-strain diagram for lubricating greases
2001 04 July/August P.S. Greenfield et al Functionalised polymers in grease: past, present and future
2001 03 May/June T.J. Hansel; W.W. Mullins Heavy duty transmission and axle lubricants mineral or synthetic for extended drain?
2001 03 May/June S. Hazan; B. Tanner Lubricant registrations under the NSF international non-food compounds registration programme
2001 02 March/April C. Köhler Food grade lubricants
2001 02 March/April J. Root Polyurea grease thickeners, a grease researcher's dream
2001 01 January/February M.D. Kieke An overview of lubricants thickened with organically modified clay
2000 06 November/December H. Bäckström Technical white oil for food-grade greases
2000 06 November/December W. Möller; G. Koch Labelling trends in the European lube oil industry
2000 05 September/October D. Bell Measurement of viscoelasticity in greases using dynamic compressional flow
2000 05 September/October P. Vergne et al Effect of carrier base solvency in greases: microstructure, properties and performances
2000 04 July/August G. Dodos The grease market in Greece
2000 04 July/August A. Mistry New global aerospace grease: SAE AMS-M core specification
2000 03 May/June C. van Booma; M.E. Hunter; R.F. Baker Corrosion: rust and beyond
2000 03 May/June L.A.T. Honary Field test results of soybean based greases developed by the UNI-ABIL research programme
2000 02 March/April D. Miller; W. Bernaards Environmentally acceptable thread compounds
2000 02 March/April E. Kuhn Viscosity rate and energy density
2000 01 January/February L. Honary Harvesting seeds planted by checkoff dollars: UNI-ABIL research programme & soybean-based industrial lubricants
2000 01 January/February I.G. Fuks; L. Bagdadarov New greases for the Russian automotive industry
2000 01 January/February E. Gard Solid lubricants! What is the future?
1999 06 November/December A.S. Polishuk Saponification for lithium greases made easier
1999 06 November/December G. Daniel et al New generation lithium complex multipurpose grease
1999 05 September/October S. Daegling Low noise greases: standards of measuring techniques and application
1999 05 September/October J. Pohlen; G. Gow From black to white: problem solving for heavy load application
1999 04 July/August A. Prato Lubricants in the food industry: market and applications
1999 04 July/August C. Streun Lubricants in the food industry: legislation and chemistry
1999 03 May/June S. Hurley; P.M. Cann Grease composition and film thickness in rolling contacts
1999 03 May/June P. Waara; P.-O. Larsson Grease behaviour in a rail lubricating system exposed to arctic conditions
1999 02 March/April J.P. King A novel solid extreme pressure/antiwear lubricant additive
1999 02 March/April J. Richter Optimizing efficiency indices of constant-velocity joints with low-friction lubricants
1999 01 January/February D.A. Slack ASTM protocol for grease test method approval
1999 01 January/February U. Duus Ren Smörja I Göteborg: a development project for environmentally adapted lubricants in Sweden
1999 01 January/February P.-O. Larsson; R. Larsson Combined experimental/numerical approach: influence of different lubricating properties
1998 06 November/December E. Kuhn Investigation of stressed greases by use of a rheometer
1998 06 November/December P. Vergne Lubricating greases, correlation between composition & rheology
1998 05 September/October A. Polishuk A brief review of calcium greases
1998 05 September/October B. Williamson; D. Miller Condition monitoring of grease lubricated rolling element bearings
1998 04 July/August J. Cliff The institute of petroleum (IP) protocol for test method approval
1998 04 July/August A. Kemble Evaluation of industrial bearing grease performance
1998 04 July/August R. Karbacher Measuring the lubricant film thickness in rolling bearings
1998 03 May/June G. Gow What's the PO.in't? A personal reflection on the state of the art
1998 03 May/June A. Mistry; R. Bradbury An evaluation of the relationship between the low temperature torque,
the apparent viscosity and the low temperature cone penetration of lubricating greases
1998 02 March/April G. Gow PO1: the story of the moral
1998 02 March/April E. Kuhn Lubricating grease : an active element of the tribological system
1998 01 January/February T. Rosemann; R. Hunt Correlation between bearing test rig performance and rheology based on a study of greases consisting of perfluorinated polyether fluids thickened with PFTE
1998 01 January/February M. Jungk; D. Hesse Silicone oil based fluids as a tool to taylor high performance lubricating greases
1997 06 November/December P. Cann Grease lubricant films in rolling contacts
1997 06 November/December T. Endo Current trends in diurea greases in Japan
1997 06 November/December W.J. Bartz Synthetic lubricating greases: a survey
1997 05 September/October R. Santorelli Accelerated oxidation stability test: an example of application in anti-oxidant additive selection
1997 05 September/October H. Kröner; E. Kleinlein Rolling bearing greases tested relevant to practical conditions
1997 05 September/October J. Cliff A Quest ion of balance
1997 05 September/October J. Tóth; C. Dudás Possibilities of development of aluminium compounds used as thickeners for lubricating greases
1997 04 July/August S. Leifheit; J. Maretzke Grease lubrication in vehicles
1997 04 July/August H. Glüsing; E. Kuhn Systematic effects on the precision of penetration readings: a contribution to the rheology of
lubricating greases
1997 04 July/August M. Pfeiffer Improvement of the delivery times at Axel Christiernsson… by matching the batches & series
1997 03 May/June M. Fuchs The European lubricating grease market
1997 03 May/June G. Fish Constant velocity joint  (CVJ) greases
1997 02 March/April P. Srinivasan New generation high performance greases
1997 02 March/April H.J. Dittebrandt Castor oil derivatives
1997 01 January/February R. Santorelli An accelerated test method for oxidation stability to predict the behaviour of lubricating greases under severe dynamic conditions
1997 01 January/February K.J. Hole; C.R. Scharf; H.F. George The enhancement of grease structure through the use of functionalised polymer systems
1996 06 November/December P. Vergne Formulation of lubricating suspensions from rheological criteria
1996 06 November/December Y.L. Ischuk; A.D. Stakhursky Expanded graphite as a dispersed phase for greases
1996 05 September/August R. Stuart Condition monitoring of offshore crane slewing bearing assemblies
1996 05 September/August T. Dell'Oro Strategic manufacturing management
1996 04 July/August E. Kuhn; H. Mörtz Investigation into the rheological behaviour of tribologically stressed greases
1996 04 July/August O. Rohr Bismuth: a new metallic but non-toxic replacement for lead in extreme pressure greases and
industrial EP liquid lubricants and sulphur: an ashless and non-metallic key element in general lubrication
1996 04 July/August G. Ponti; M. Valenetti The grease market in Italy
1996 03 May/June W.J. Bartz Lubricants and the environment
1996 03 May/June P.M. Cann Cost 516 Tribology
1996 02 March/April Y. Lefaucheux Environmental management and lubricants
1996 02 March/April L. Hamnelid 1994 Survey of test methods in practical use
1996 01 January/February R. Becker; A. Knorr Comparative study of the oxidation of vegetable oils and the effectiveness of antioxidants
1996 01 January/February E. M. Stempfel; H. Hostettler; H.R. Gasser Practical experience with highly biodegradable lubricants, especially hydraulic oils and
lubricating greases
1995 06 November/December G.A. Bell The effect of PTFE particle characteristics on grease formulation & performance
1995 06 November/December G.T.Y. Wan Monitoring rolling bearing operating condition
1995 05 September/August C. Gallegos; J.M. Franco Gómez Rheology of lubricating greases
1995 05 September/August S. Harold; P. Todd Design of greases and other lubricants using ecologically responsive technology
1995 04 July/August M. Kingston Filter cleaning
1995 04 July/August R. Weyandt Principles of ecotoxicology and problems with testing substances which have low water solubility
1995 03 May/June L. Muntada The lubricant market in Spain
1995 03 May/June E. Kuhn Some aspects of an estimation of the behaviour of tribological stressed greases
1995 03 May/June T. Dell'Oro North American lubricants cost management: present, past, future
1995 02 March/April E. Kleinlein Operating of ball and roller bearing at low temperatures
1995 02 March/April D. Smit EC legislation directives on health, safety and the environment
1995 01 January/February P.M. Cann The influence of temperature on the lubricating behaviour of a lithium hydroxystearate grease
1994 July Ferenc Supply & demand of lubricants in Hungary
1994 July Ischuk; Nemirovska; Borisenko; Stakhursky Role of the dispersion medium in structurisation of diurea grease
1994 January Pane Sulphonates as rust & corrosion inhibitors in grease
1994 April Astrom; Hoglund Viewpoints on noise in grease lubricating bearings
1994 April Basset Gear greases & their applications
1993 October Williams; Siptak The use of organoclays in clay-based grease
1993 October Schmidt; Huls Modified natural base oils
1993 July Nemack Biodegradable lubricants used in lubricating greases
1993 July Alberto; Belin The running in of big gears - a lubrication affair
1993 July Barbosa Lubricating grease production in Portugal
1993 January Korff; Röhrs Heavy metal-free additives for lubricating grease
1993 January Dalmas; Chaomleffel Grease film thickness & traction in elastorheodynamic point contacts
1993 April Montagna New soluble additives for perflourinated greases
1992 October Charlton The effective in-service lubrication of wire ropes
1992 October Kendall; Williamson The influence of grease composition on film thickness in EHD contacts
1992 July Beghini Cleanliness & its importance to bearing performance
1992 July Jacobs; Stringfellow Graphite & lead based thread compounds compared
1992 January Stempfel; Schmid Biodegradable lubricating greases
1992 January Holinski Solid lubricants as additives in greases
1992 January Kruschwitz Aluminium complex greases
1992 April Stang; Jansson Characterisation of base oils used in grease manufacturing
1991 October Lefevre Classification & labelling of dangerous chemicals in the European community
1991 October Van Knijff Grease packages & the environment
1991 October Sottomayor; Campos; Seabra; Ferreira Friction force in an EHD contact
1991 August Kleinlein FAG-FE9 test system, test rig general machining principle & application of the results to practice
1991 August Hoglund; Isaksson; Wikstrom The influence of the rheology & lubricity of greases on energy loses in machines
1991 August Ischuk; Kobylianski Integrated test methods to determine shear strength, water induced & thermal setting of grease
1991 August Cann; Aderin; Spikes Optical & infrared studies of EHD behaviour of greases
1991 April Leluan Lubrication of the TGV railway axel box